Life Supreme 1

MRP  26990.00

Life Supreme 2

MRP  46990.00

Commercial 50LPH Open RO

MRP  40500.00

Commercial 50-100LPH RO

MRP  42500.00

Commercial 250-750LPH RO

MRP  41000.00

Commercial 100-250 LPH RO

MRP  42500.00


May   2018

Why We Love Industrial RO Water Purifier (And You Should, Too!)

Posted By :  Admin

The Industrial Water Purifier Plant:

The industrial water purifier is mainly used to purify water at the large scale. This is based on the reverse osmosis technology. In the reverse osmosis technology, water is forced to pass through the membrane in the opposite direction of their natural flow. Generally, water flows from the lower concentration of solute to the higher concentration of solute or in the other word you can say that water flows from the high concentration to the low concentration of water. The membrane used in reverse osmosis technology is selective in nature and only allow the selective compound to pass through it.

Benefits of Drinking Pure & Healthy Water:

  • Drinking pure water is good for the joint health.
  • Pure and healthy water removes the toxin from your body
  • Helps you to build up your muscle
  • Helps to decrease obesity

Domestic versus Industrial Water Purifier:

Most of the people are confused about the domestic and industrial water purifier but there is no big difference between them. The only one difference is that industrial water is bigger in size and come up with higher water output. If you require water purifier for masses of people than you should choose industrial water purifier. The industrial water purifier capacity ranges from 100LPH to 105 (one Lakh) LPH.

Why is Industrial Water Purifier Necessary?

The purification of water is one of the biggest concern of today's world. Nowadays everything is polluted including water, air, and soil which leads to many serious diseases. Approx 60% of human body is made up of water so the purity of water become the essential aspect. If your water is not pure than you become the host of many micro-organisms which can cause sickness in you.

Working of Industrial Water Purifier:

Industrial water purifier has multiple stages of water purification to give you the purest form of water. Their stages are discussed below:-

  • Sediment Filter/Spun:

This type of filter is just like sieves and only removes the physical impurities or sediment present on the bed or bottom of the water. This process is called as sedimentation. The pore size of the sediment filter is in “micron” and does not allow the particle whose size is more than the pore size of the sediment filter. There are two types of a sediment filter, namely normal & absolute sediment filter. Normal sediment filter removes about 85% of physical impurities whereas absolute sediment filter removes about 98-99% of physical impurities. Among the normal and absolute sediment filter, the normal filter is common whereas absolute filter is used when the higher grade of water is required.

  • Carbon Filter:

Carbon filter method use bed of activated carbon to removes the impurities present in the water. It is an effective method for the removal of impurities because carbon filter has a large surface area (one pound of carbon possess approx 125 acres surface area). This process depends upon the adsorption and traps the pollutant present in the water. This stage of water purification efficiently removes odor, chlorine, volatile organic compound, some physical impurities (sediments), and unpleasant taste of water. Carbon filter can remove sediments of 50 to 0.5 micrometers in size. There are two types of the carbon filter, namely granular activated carbon filter and block carbon filter. Granular activated carbon filter has slight positives charge which attracts the negatively charged impurities whereas block carbon filter is denser in nature so water travels slowly on the block carbon. The work efficiency of the carbon filter depends on many factors such as surface area, water flow, and time spent by contamination on the carbon filter (more the time contamination is in contact with carbon, more impurities are removed).

  • Reverse Osmosis Membrane:

In the reverse osmosis technology, water is passed through the semi-permeable membrane under high pressure. This semi-permeable membrane is made up of synthetic plastic material which allows the water to pass through it. The pore size of the membrane is near about 0.0001 microns. This stage of water purification is mainly used to remove dissolved impurities and salts. Reverse osmosis membrane is certified for the removal of many heavy metals such as lead, arsenic, copper, cryptosporidium, TDS (Total Dissolved Salts), and many others. RO membrane also removes the micro-organism (bacteria, fungi, algae, and others) present in the water.

  • Silver Coated Carbon:

Silver is bactericidal in nature which kills or reduce the reproduction rate of the micro-organism. Silver coated on the carbon prevent the growth of the micro-organism on the carbon and act as a disinfectant. This stage of water purification efficiently controls the growth of the micro-organism. The World Health Organization (WHO) guideline on drinking water says that 0.1mg/ liter silver in drinking water does not have any health risk.

  • UV Purification:

Ultra-violate rays are used in the UV-purification technology to kill or inactivate the growth of the bacteria, fungi, algae, and another biological contamination present in the water. So this technology is effective for the removal of micro-organism, but it can’t remove dissolve and undissolved impurities from the raw water. To overcome this problem UV-purifier unit contains pre-filters to eliminate the physical and dissolved impurities. It also contains activated carbon filter to removes the chlorine from the water as UV- filter can’t remove chlorine from your raw water. If your regular water contains high total dissolved salts (TDS) then you should choose UV+RO purifier.

  • Ozonation:

The process of ozone (i.e., O3)  generation is called as ozonation. It is an advanced technology mainly used for the water purification. Ozonation is a certified technology for the removal of additional impurities from your regular water. Generally, ozonation technology is used in swimming pool management along with food, chemical, medical & etc.

O3 (ozone) is produced by heating the oxygen (o2), it is a colorless gas which generally disappears in few seconds to 30 minutes. Ozone has disinfection properties hence it is suitable for the water purification process.

  • Re-mineralization:

Nowadays most of us suffering from a mineral deficiency disorder because we don’t take proper diet due to our busy schedule. So you need to take essential minerals from the water. Hence water purifier manufacturer introduces a new technology which not only removes the unwanted minerals but also maintains the level of essential minerals in your water. This stage is called as re-mineralization. In this stage, some of the minerals are re-added into your water to improve the quality of the water.

Component of Industrial Water Purifier:

  • Raw Water Pump: This pump allows the raw water to pass at a certain pressure.
  • Low-Pressure Switch (LPS):   This switch shut down the RO water purifier machine if input pressure is low.
  • High-Pressure Switch (HPS): HPS switch is used to shut down the RO water purifier machine if output pressure is low.
  • Dosing Pump: It is a positive displacement pump which is designed to pump a very precise flow of chemical into the water. In water purification process dosing pump are used to add antiscalant (antiscalant is a pretreatment injection which is added to the water before the raw water enters the RO membrane which delays the reaction between the calcium, magnesium, and bicarbonate) to a certain quantity. There are four different types of dosing pump which are given below:-
    • Diaphragm Type Constant Injection
    • Diaphragm Type Pulse Injection
    • Lobe type Pump
    • Peristaltic Pump
  • Automatic Electrical Panel: This panel contains a certain type of electric circuit
    • Rotameter: Rotameter is an electrical device which is generally used to monitor the volumetric flow of the water/liquid of a closed tube or container.
    • Pressure Gauges/ Vacuum Gauges: It is a device which is used to measure the pressure (i.e force applied by the fluid on the surface area) of the fluid.

Application of Industrial Water Purifier:

Nowadays the need of the water purifier is spreading very frequently in every filed. Some of the application of industrial water purifier is given below:-


Drinking more and pure water is most important for the young generation because it provides several health benefits. As we know that kids are the future of the country hence it's our duty to provide them a pure and healthy water. Pure and healthy water improve the immunity of the kids which helps them from the various diseases. Nowadays kids and college going students mostly depend on the fast food which mainly leads to obesity. Drinking pure water is very much beneficial for those who want to lose their weight. It not only helps you to lose weight but also improves your digestion and brain activity. So drinking pure and healthy water is very much essential to improve growth of the kids. The installation of industrial water purifier is not only beneficial for the kids but also improves your profession because many parents care about the health of their child, if your school/college does not have industrial water purifier then you can receive a loss in your profession.

Hotel & Restaurant:

Have you ever face a problem that your chef give their best but they are not able to cook tasty food? If your answer is “yes” then you should think about water purifier. Some of the RO water purifier manufacturers especially design water purifier for the hotel and Restaurant which can fulfill your requirement.
As we know that water does not have any color and odor but your regular water may have some odor due to the presence of dissolve contamination and bacteria. Tap or regular water contains many unwanted minerals in very high concentration which can add some odor in the water. The presence of impurities and micro-organisms in the water can add some unpleasant odor in your food which ultimately destroys the taste of the food.


Hospital is the place where clean and purest form of water does matter because impurities present in the water can harm the patients. The patients present in the hospital has a weak immune system, in that case, it becomes essential for the hospital management to provide them the purest water because any types of impurities can attack them. There is some process (such as hydration, dialysis, and etc.) which requires pure and healthy water.

Biotechnology and R&D:

The researcher needs to culture many micro-organisms which require nutrition media and proper sterilization. To prepare nutrition media you need water (mainly distilled water) because distilled water does not contain any contamination. Any contamination present in the nutrition media destroys the culture of the particular micro-organism. Contamination in the culture media is one of the big aspects of the R&D sector.


About The Author

Abhishek Kumar
Biotechnology (M.Tech)


Book Service
Book RO Service
+91-926 888 7770